|
Language: EN | 中文 |

Share:


TC80-CCL

Quantity: In Stock

Product outline

・TC80-CCL is a compact torque converter.
・Compatible with rotary encoder option (UTMⅡ(R)/ UTMⅢ(R)) too!
・UTM III / UTF digital output can be read, and make noise resistance tester.
・Torque data (hold value) is stored up to 100, and data can be read.

Lightweight and compact body to fit into limited space in a control panel

Light weight & compact body for 35mm DIN rail mount
TC80_din

Application software for USB interface

With communication through USB interface,
graph display, reading hold data,
setting parameters, and calibration can be done.

 

 

Specifications

 

 

Analog section
Signal input range -10 to +10V (UTMⅢ/UTF Option) Input impedance:
1MΩ or more
-5 to +5V (UTMⅡ/UTMV) Input impedance: 1MΩ or
more
Accuracy Non-linearity: within 0.02%FS±1digit
Zero drift: within 0.2mV/℃ RTI
Gain drift:within 0.01%/℃
Digital low-pass
filter
PASS,3 to 1kHz
A/D converter Rate :16000times/sec
Resolution:24bit (binary)  Approx. 1/30000 against 10V
Analog monitor output (Test point /
UTF Option)
Transmitted input voltage
Pulse input for rotation speed (open collector input/UTMⅡ/UTMV/UTMⅢ)
Max. rotation speed Depend on UTMⅡ/ UTMV/ UTMⅢ
Min. rotation speed Selectable from 15, 10, 5, 3, 2rpm (when pulse rate is 4 ppr)
Selectable from 60, 40, 20, 12, 8rpm (when pulse rate
is 1 ppr)
Min. pulse width 50μs
Circuit
configuration
No-voltage contact input (minus common)
Connectable to open collector (Ic=Approx. 10mA)
Rotation speed input for low speed(Pulse input, open collector)
Maximum input frequency Approx. 1000rpm
Minimum input frequency 0.1rpm
Minimum detection pulse width 5μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic=Approx. 10mA)
Pulse input for rotation speed (Line driver: RS-422A compliant/ UTF
option)
Max. frequency Depend on UTF
Circuit
configuration
Line driver (RS-422A compliant)
Encoder input(Pulse input) UTMⅡ/UTMⅢ Compatible with rotary encoder option
 
Display section
Display unit Character height 8mm
Numerical display by 7-segment green LED
Display content Switchable numeric display (torque, rotation speed,
angle)
Display frequency Selectable from 1, 3 , 6, 13, 25 times/sec.
Status display RUN、SD、RD、ERR
 
External signal
Output signal (2) Selectable/ configurable
Transistor’s open collector output
Vceo=30V、 Ic=50mA
Input signal (1) Selectable/ configurable
Contact (relay, switch, etc.) or non contact (transistor, photo coupler, etc.)
Input is ON when shorted to COM terminal
 
Interface
USB USB Interface
CCL CC-Link Interface
485 RS-485 Interface
422 RS-422A Interface (UTF Option)
 
General performance
Power supply
voltage
DC24V ±15%
Power consumption 6W typ.
Operating
conditions
Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃
Humidity: 85%RH or less (non-condensing)
Dimensions 34(W)×88(H)×91(D)mm (Projections excluded)
Weight Approx. 230g
CE marking certification EMC directives EN61326-1
 
Attachments
Quick manual 2
CC-Link connector 1
Mini driver 1
Various I/O connector 2
Ferrite core 1
 

Download

Product catalogue(PDF)
TC80 catalogue(862 KB)



 Inquiry - TC80-CCL