TM700
TM700 Torque Monitor Torque Application Unipulse Penang, Malaysia, Simpang Ampat Supplier, Suppliers, Supply, Supplies | iMS Motionet Sdn Bhd
RM 0.00
Quantity

Product outline

UTMII/UTMV series can be easily connected to TM700 with the supplied cable. With the high-speed sampling rate of 20kS/s, TM700 can support the high response time of UTMII/UTMV (1kHz). Fluctuation of torque, rotation speed, and power over a short period of time can be displayed.
Features
  • Torque monitor for UTM/UTMV.
  • Display the curves of torque, rotation speed, and power.
  • Enable the cogging torque measurement with UTMII/UTMV.
  • Easy connection to UTM/UTMV with one cable.
  • Operation power can be supplied to the UTM/UTMV (and to the optional rotary encoder as well).
  • Upper/lower limits & hold function.
  • Ideal for applications such as nut runners, motor test benches, engine test bench, mixer, wind power generation, etc….
Sample display

External dimension

 

 

Specifications

Torque input (voltage input)
Signal input range -5 to +5V Input impedance:1MΩ or more
Accuracy Non-linearity:within 0.02%FS±1digit
Zero drift: within 0.2mV/→ RTI
Gain drift : within 0.01%/→
Analog filter Low pass filter (-6dB/oct.)
Select from 10, 30, 100, 300, 1k, 3k, 10k, 30kHz
A/D converter ・ Rate :20000times/sec
・ Resolution:24bit (binary)  Approx. 1/30000 against 5V
Monitor output Output level :input voltage cuff (for test point)
 
Input for high-speed rotation (open-collector pulse)
: for standard UTMII/UTMV.
Maximum input frequency In accordance with the output frequency of the UTM/UTMV series
Minimum input frequency Select from 15, 10, 5, 3 or 2 rpm (when pulse rate is 4 ppr)
Select from 60, 40, 20, 12 or 8 rpm (when pulse rate is 1 ppr)
Minimum detection pulse width 50μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic=Approx. 10mA)
 
Input for low-speed rotation (open-collector pulse)
: for UTMII with rotary encoder option
Maximum input frequency Approx. 1000rpm
Minimum input frequency 0.1rpm
Minimum detection pulse width 5μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic=Approx. 10mA)
 
Display section
Display unit 3.5 inch TFT color LCD
 
External I/O signal
External output (8) ex) high and low limit outputs
External input (10) ex) hold control input, digital zero input(DZ)
 
Interface
Standard SIF:2-wire serial interface
USB:USB interface
Option D3V:D/A converter voltage output (3ch)
 
General specifications
Power supply DC24V (±15%)
Power consumption 6W typ.
Operating conditions Operation temperature:-10 to +40→, storage temperature: -40 to +80→
humidity:85%RH or below (non-condensing)
Dimension 96(W)× 96(H)× 138(D)mm (excluding projections)
Weight Approx. 1.0kg
CE marking certification EMC directives EN61326-1
 
Attachments
  Operation manual・・・・・・1
External input/output connector・・・・・・1
Cable for connecting UTM/UTMV (2m)・・・・・1
Operating tool (with D/A converter(3ch) option)・・・・・・1
 

Optional accessories

Model Description
DTC2 Case for TM700 (with AC power supply)
CA372-I/O Cable with FCN connector at one-end 3m
CA81-USB miniUSB-computer USB cable 1.8m
CATM21-M 2m cable for connecting UTM/UTMV
CATM51-M 5m cable for connecting UTM/UTMV
CATM(R)21 2m cable for UTMwith rotary encoder connection (non-connector at one end)
CATM(R)21-M 2m cable for connecting UTMrotary encoder
CATM(R)51-M 5m cable for connecting UTMrotary encoder
CN50 FCN series I/O connector (with cover)
CN55 FCN series I/O connector (with diagonal cover)
CN73 D/A converter(3ch) connector
CN90 Waterproof plastic connector for UTM/UTMV
CN91 Waterproof plastic connector for UTMrotary encoder
GMP96x96 Rubber seal
TSU03 DC lighting surge unit
 

Download

Product catalogue(PDF)
TM700 catalogue(491 KB)

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version