UTMV
UTMV Torque Meter Unipulse Penang, Malaysia, Simpang Ampat Supplier, Suppliers, Supply, Supplies | iMS Motionet Sdn Bhd
RM 0.00
Quantity
Drip & rust proof rotating torque meter
 

Product outline

Drip & rust proof rotating torque meter

 

Drip & rust proof rotating torque meter, UTMV, is now available. With the protection equivalent to IP65, it can be used in an environment with possible exposure to rainwater, seawater, minute dust particle, and oil-mist.

 



¡ö Degree of protection: equivalent to IP65
¡ö Made of rust-resistant stainless steel
¡ö Labyrinth structure type is recommended for a rainwater/seawater environment
Fluororubber rotating seal type is recommended for a minute dust/oil-mist environment(option)
¡ö Capacity type: 0.1, 0.5, 1, 5, 10, 50, 100, 500, 1000, and 5000Nm

¡ï¡îPlease contact us now for product trial or demonstration!¡î¡ï

it can be used in an environment with possible exposure to rainwater, seawater, minute dust particle, and oil-mist.

Resistant to water and oil!

 

Application examples

Application examples

 

Labyrinth seal type & Fluoro rubber rotating seal type(Option£º(S))

The standard type comes with labyrinth seals suitable for use in an environment with possible exposure to rainwater or seawater.

Fluororubber rotating seal type is recommended for uses in an environment where minute powder or oil-mist exists. 
Please note that a rotating seal has a limited lifetime. 
 

Seal type Labyrinth seal Fluoro rubber rotating seal
Drip proof Yes Yes
In minute powder/oil-mist environment. Not suitable Yes
Friction torque Very low Max. 10% (0.1Nm type)
Max. speed 10000rpm (0.1Nm type) 2120rpm (0.1Nm type)
Maintenance Unnecessary Necessary

 

Seal type

 

 

Specifications

The standard type comes with labyrinth seal, and fluororubber rotating seal type "(S)" is available as an option.
 

  UTMV
-0.1Nm
UTMV
-0.5Nm
UTMV
-1Nm
UTMV
-5Nm
UTMV
-10Nm
Measurement range ±0.1Nm ±0.5Nm ±1Nm ±5Nm ±10Nm
Seal type standard £¨S£© standard £¨S£© standard £¨S£© standard £¨S£© standard £¨S£©
Power supply DC24V ±15£¥¡¡
Consumption current 100 mA or less
Output range ±5V DC¡¡Load resistance must be more than 2kΩ
Responsivity 1kHz
Rotation signal 4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA
Safe overload 500%FS
Non-linearity 0.03%FS£¨Typ£©
Hysteresis 0.03%FS£¨Typ£©
Repeatability 0.03%FS£¨Typ£©
Operation temp. range £­10¡«£«50¡æ
Temp. effect on zero 0.01%FS/¡æ£¨Typ£©
Temp. effect on span 0.01%FS/¡æ£¨Typ£©
Max. rotation speed £¨rpm£© 10000 2120 10000 1590 10000 1590 9000 1060 9000 1060
Torsional spring
constant£¨Nm/rad£©
11.13 89.5 172 897 1400
Maximum
torsional angle
8.99
×10-3rad

£¨0.515°£©
5.59
×10-3rad

£¨0.320°£©
5.83
×10-3rad

£¨0.334°£©
5.58
×10-3rad

£¨0.320°£©
7.14
×10-3rad

£¨0.409°£©
Inertia moment£¨kgm2£© 1.15
×
10-6
0.99
×
10-6
2.19
×
10-6
1.90
×
10-6
2.22
×
10-6
1.93
×
10-6
5.60
×
10-6
4.90
×
10-6
5.70
×
10-6
5.00
×
10-6
Main frame
dimension£¨W×H×D mm£©
54×50×40 54×50×40 54×50×40 57×55×40 57×55×40
Length 97mm 107mm 107mm 121mm 121mm
Shaft dia. 5mm 8mm 8mm 12mm 12mm
Approx. Weight 390g 430g 430g 580g 580g
CE marking certification EMC directives  EN61326-2-3

 

  UTMV
-50Nm
UTMV
-100Nm
UTMV
-500Nm
UTMV
-1000Nm
UTMV
-5000Nm
Measurement range ±50Nm ±100Nm ±500Nm ±1000Nm ±5000Nm
Seal type standard £¨S£© standard £¨S£© standard £¨S£© standard £¨S£© standard £¨S£©
Power supply DC24V ±15£¥¡¡
Consumption current 150 mA or less 160 mA or less
Output range ±5V DC¡¡Load resistance must be more than 2kΩ
Responsivity 1kHz
Rotation signal 4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA
Safe overload 500%FS
Non-linearity 0.03%FS£¨Typ£©
Hysteresis 0.03%FS£¨Typ£©
Repeatability 0.03%FS£¨Typ£©
Operation temp. range £­10¡«£«50¡æ
Temp. effect on zero 0.01%FS/¡æ£¨Typ£©
Temp. effect on span 0.01%FS/¡æ£¨Typ£©
Max. rotation speed £¨rpm£© 5700 680 4800 570 4800 380 4800 270 4000 180
Torsional spring
constant£¨Nm/rad£©
6887 1.64×103 93.6×103 326×103 1418×103
Maximum
torsional angle
7.26
×10-3rad

£¨0.416°£©
6.11
×10-3rad

£¨0.350°£©
5.34
×10-3rad

£¨0.306°£©
3.07
×10-3rad

£¨0.176°£©
3.53
×10-3rad

£¨0.202°£©
Inertia moment£¨kgm2£© 4.21
×
10-5
3.86
×
10-5
9.6
×
10-5
10.9
×
10-5
6.2
×
10-4
6.1
×
10-4
3.56
×
10-3
3.51
×
10-3
2.38
×
10-2
2.34
×
10-2
Main frame
dimension£¨W×H×D mm£©
70×68×51 67×74×57 67×79×72 86×103×98 97×141×137
Length 207mm 215mm 257mm 326mm 433mm
Shaft dia. 20mm 25mm 40mm 60mm 90mm
Approx. Weight 1.6kg 2.1kg 4.0kg 10.5kg 28.3kg
CE marking certification EMC directives  EN61326-2-3

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version