UTM II(W) & UTMV(WR)
UTM II(W) & UTMV(WR) Torque Meter Unipulse Penang, Malaysia, Simpang Ampat Supplier, Suppliers, Supply, Supplies | iMS Motionet Sdn Bhd
RM 0.00
Quantity

Product outline

Rotary torque meter with square drive

 

Ideal torque meter for torque monitoring of screwdriving machines and power tools such as nutrunners. 
Ensures high speed and accurate torque measurement during tightening with UTM.
Can be used with portable torque monitor TM400 for on-site calibration. 

Torque monitoring : UTMW
Torque+Angle monitoring : UTMWR
NEW

 

 

 

Capacity: 100Nm or 500Nm

Please contact us now for product trial or demonstration!

Note: This product is not for impact wrench

Torque can be monitored easily just by setting the sensor between socket and shaft of a nut runner.

Nut runner

 

0.03 high accuracy & stable
Non-linearity of 0.03% with outstanding zero stability.
Small torque can be measured at high accuracy.

 

Avoid data loss
No slip-ring ensures that torque can be measured consistently.

 

 

 

Best fit for angular tightening (rotation angle method)!UTM II(WR)

By monitoring rotation angle and torque at the same time, accuracy and consistency of torque tightening can be checked.

By monitoring rotation angle and torque at the same time, accuracy and consistency of torque tightening can be checked.

 

Best fit for torque control & rotation angle tightening method
By directly attaching the torque meter to the end of nutrunner, torque can be measured accurately.
It has a function to reset angle to 0° when any specific torque value is exceeded.
Rotation angle and torque can be measured automatically after exceeding snug torque.

 

3600 torque pulses per rotation with 0.1 degree resolution
Can be used for on-site calibration with 0.1 degree resolution!
When using TM400

 

Portable torque monitor TM400Optional accessories
Portable type with built-in battery. Changes in torque can be displayed with respect to angle.
Peak value of torque and angle can be measured and saved in internal memory. 

TM400

 

UTM II(W) specifications

Model UTM-100NmW UTM-500NmW
Measurement range ±100Nm ±500Nm
Power supply DC24V ±15
Power consumption 150mA or less
Output range ±5V DCLoad resistance must be more than 2kΩ
Responsivity 1kHz
Rotation signal 4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA
Safe overload 500%FS
Non-linearity 0.03%FSTyp
Hysteresis 0.03%FSTyp
Repeatability 0.03%FSTyp
Operation temp . range 1050
Temp. effect on ZERO 0.01%FS/棨Typ
Temp. effect on span 0.01%FS/棨Typ
Max. rotation speed 15000rpm 10000rpm
Torsional spring constant 38.5×103 Nm/rad 265×103 Nm/rad
Maximum torsional angle 2.60×10-3rad0.149° 1.88×10-3rad0.108°
Inertia moment 3.8×10-5kgm2 2.15×10-4kgm2
Ext. dimension (case size) 67W×74H×57Dmm 67W×79H×72Dmm
Total length 100.5mm 115mm
Shaft diameter 12.7mm 19.05mm
Weight Approx. 0.8kg Approx. 1.4kg
CE marking certification EMC directives EN61326-2-3
 

UTM II(WR) specifications

Model UTM-100NmWR-12.7 UTM-100NmWR-19.05 UTM-500NmWR-19.05
Measurement range ±100Nm ±100Nm ±500Nm
Power supply DC24V ±15
Power consumption 150mA or less
Output range ±5V DCLoad resistance must be more than 2kΩ
Responsivity 1kHz
Rotation signal 4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA
Angle of rotation (encoder) output 3600 torque pulses per rotation
Safe overload 500%FS
Non-linearity 0.03%FSTyp
Hysteresis 0.03%FSTyp
Repeatability 0.03%FSTyp
Operation temp . range 1050
Temp. effect on ZERO 0.01%FS/棨Typ
Temp. effect on span 0.01%FS/棨Typ
Max. rotation speed
Measurable range for angle
10000rpm 
(2000rpm)
Torsional spring constant 26.4×103 Nm/rad 54.6×103 Nm/rad 136×103 Nm/rad
Maximum torsional angle 3.78×10-3rad0.217° 1.83×10-3rad0.105° 3.68×10-3rad0.211°
Inertia moment 3.58×10-5kgm2 1.92×10-4kgm2 2.06×10-4kgm2
Ext. dimension (case size) 87W×74H×57Dmm 87W×79H×72Dmm
Total length 120.5mm 133mm
Shaft diameter 12.7mm 19.05mm
Weight Approx. 0.9kg Approx. 1.7kg Approx. 1.8kg
CE marking certification EMC directives EN61326-2-3

 

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version