UTMII
UTMII Torque Meter Unipulse Penang, Malaysia, Simpang Ampat Supplier, Suppliers, Supply, Supplies | iMS Motionet Sdn Bhd
RM 0.00
Quantity

 


Improved specification & performance


New slip-ring-lessrotating torque meter

 

Torque meter / torque sensor_1

Torque meter / torque sensor_2

Torque meter / torque sensor_3

Torque meter / torque sensor_4

Torque meter / torque sensor_5

 

High accuracy, stability, slip-ring-less, and compact

 

 

High accuracy and stability
1/10000 resolution with outstanding zero stability.
Even small torque variations can be detected by UTM.

 

Maintenance-free
No slip ring.
The lifetime of UTM is mainly determined by the lifetime of bearings.

 

Max. speed 25000 rpm0.0510Σ

Small starting torque
The starting torque of the bearing in the UTM-0.05Nm is only 0.00001Nm (0.03 %FS).
Actually, the effect of rotating friction can be negligible.
 

Smart system configuration with no external circuits needed 


Simultaneous detection of torque and rotating speed
Torque meter / torque sensor_6

Real-time dynamic measurement is possible from torque and rotation pulse signals.


Torque variation against angles is detected
Torque meter / torque sensor_7

Equipped with an optional rotary encoder to the UTM, torque and angles are simultaneously monitored.

 

 

Application Examples

 

 

Quality Check of Pumps (Oil pump, Tube pump, Vacuum pump and so on…)

 

 

Quality Check of Pumps

Wide Capacity Range + Variety of Torque Monitors!

·Wide range: 0.05Nm – 10,000Nm
  →For various automotive components: Motors, compressors, alternators, EPS unit, pumps, etc….

·UPM100 or TM301 to monitor torque, rotation speed, and power simultaneously!

·No slip rings
  →No need to stop the machine to change brush
  →Maintenance-free & efficient
  →High rotation speed!

 

Wear/friction test of rubber products

 

 

Quality Check of Pumps

 

Built-in Amplifier in the Compact Body!

·Compact to fit into limited space of a machine.

·Built-in amplifier: +/-5V
  →No need of external amplifier
  →Save the cost!

·High-accuracy: 0.03% Non-linearity
  →Can be used for wear or friction test!

 

Torque-angle measurement of seat recliners

 

 

Quality Check of Pumps

Easy to Perform Torque-Angle Measurement!

·Rotary encoder mounted on the shaft of UTMII
  →No need to adjust the alignment of the rotary encoder.

·TM500 for “torque vs. angle” curve
  →SD Card option to save the data
  →RS-232C for connecting with PLC or PC

 

Quality check of hinges and dampers

 

 

Quality Check of Pumps

High Accuracy & High Safe Overload!

·High-accuracy: 0.03% (non-linearity).
  →Can be used for measuring very low torque (e.g hinge torque)

·Rotary encoder option for angle measurement.

·500% Safe overload
  →Much safer!
  →Ideal when high accuracy is required in low torque range!

 

 

Specifications

 

 
0.05Nm10Nm
Measurement range
Σ
0.05 0.1 0.2 0.5 1 2 5 10
Option Rotary encoder Rotary encoder
Key groove
Ext. dimension (case size)
W
H

mm
54
50
40
57
55
40
Total length
mm
74 84 97
Shaft diameter
mm
5 8 12
Power supply 100mA or less
Max. rotation speed 25000rpm
Approx. weight 160g 180g 270g
 
20Nm10000Nm
Measurement range
Σ
20 50 100 200 500 1000 2000 5000 10000
Option Rotary encoder
Key groove
Key groove
Ext. dimension (case size)
W
H

mm
70
68
51
67
74
57
67
79
62
67
79
72
86
103
98
86
119
111
97
141
137

103
166
162

Total length
mm
150 170 177 187 217 286 306 387 447
Shaft diameter
mm
20 25 30 40 60 70 90 110
Power supply 150mA and less 160mA and less
Max. rotation speed 20000rpm 15000rpm 12000rpm 10000rpm 7000rpm 6000rpm 5000rpm 4000rpm
Approx. weight 700g 1.1kg 1.5kg 2.6kg 7.3kg 10.5kg 21.4kg 36kg
 
Common specification
Power supply DC24V ±15
Output range ±5V DCLoad resistance must be more than 2kΩ
Responsivity 1kHz
Rotation signal 4 pulses per 1 rotation 
Open collector Max. ratings 30V, 10mA
Safe overload 500%FS
Non-linearity 0.03%FSTyp
Hysteresis 0.03%FSTyp
Repeatability 0.03%FSTyp
Operation temp . range 1050
Temp. effect on ZERO 0.01%FS/棨Typ
Temp. effect on span 0.01%FS/棨Typ
CE marking certification EMC directives  EN61326-2-3
 
Download Link Below :
http://www.unipulse.com/en/products/UTM+II.html

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version